manualshive.com logo in svg

Agilent Technologies ESG series, User And Programming Manual, Page: 126 / 446

Share
Download
Agilent Technologies ESG series User And Programming Manual Download Page 126

3-56

Real-Time I/Q Baseband Generator User’s and Programming Guide

Softkey Reference

ESG Family Signal Generators

C

Options UN8 and 202

Configure Up Control 1

Pressing this softkey displays a menu of softkeys where you can
configure a timeslot as an uplink subslot 1 control timeslot. Up control
1 is half of a timeslot in length. Either subslot 1 or subslot 2 can be
filled, but not both. The following figure shows an example of an uplink
subslot 1 control timeslot as it is defined by the TETRA format.

•

R:

ramp time is a 34-bit field. The grey text indicates that you

cannot change the contents of the this field.

•

T:

shows the contents (hexadecimal B) of both of the 4-bit tail fields.

The grey text indicates that you cannot change the content of these
fields.

•

Data:

shows the data selection (PN9) for both 84-bit data fields.

Other selections allowed include PN15, fixed 4-bit patterns, fixed
patterns of ones and zeroes, user files, or external data.

•

TS:

shows the contents (hexadecimal 2743A743) of the 30-bit

training sequence field. The

TS

 softkey makes this the active

function.

•

G:

there are two guard time fields: the first is a 15-bit field for

subslot 1; the second is a 255-bit field that fills subslot 2. The grey
text indicates that you cannot change the content of these fields.

Softkey Location:

Mode

>

TDMA

>

TETRA

>

Data Format Pattern Framed

>

Configure Timeslots

>

Timeslot Type

>

Up Control 1

>

Configure Up Control 1

Summary of Contents for ESG series































































































































































































































































































































































































































































Reviews:

No comments