Agilent Technologies E8663B, User Manual

Page: 45 / 92

Agilent E8663B Analog Signal Generator User’s Guide 35
Basic Operation
Using Data Storage Functions
5. Press Add Comment to Seq[1] Reg[01] .
This enables you to add a descriptive comment to sequence 1 register 01.
6. Using the alphanumeric softkeys or the knob, enter a comment and press Enter .
7. Press
Edit Comment In Seq[1] Reg[01]
.
If you wish, you can now change the descriptive comment for sequence 1 register 01.
After making changes to an instrument state, you can save it back to a specific register by highlighting that
register and pressing
Re-SAVE Seq[n] Reg[nn]
.
Recalling an Instrument State
Using this procedure, you will learn how to recall instrument settings saved to an instrument state register.
1. Press Preset .
2. Press the
Recall
hardkey.
Notice that the Select Seq softkey shows sequence 1. (This is the last sequence that you used.)
3. Press
RECALL Reg
.
The register to be recalled in sequence 1 becomes the active function. Press the up arrow key once to
select register 1. Your stored instrument state settings should have been recalled.
Deleting Registers and Sequences
These procedures describe how to delete registers and sequences saved to an instrument state register.
Deleting a Specific Register within a Sequence
1. Press
Preset
.
2. Press the Recall or Save hardkey.
Notice that the
Select Seq
softkey shows the last sequence that you used.
3. Press Select Seq and enter the sequence number containing the register you want to delete.
4. Press
Select Reg
and enter the register number you want to delete.
Notice that the Delete Seq[n] Reg[nn] should be loaded with the sequence and register you want to delete.
5. Press
Delete Seq[n] Reg[nn]
.
This deletes the chosen register.
Deleting All Registers within a Sequence
1. Press
Preset
.
2. Press the
Recall
or
Save
hardkey.
Notice that the
Select Seq
softkey shows the last sequence that you used.
3. Press
Select Seq
and enter the sequence number containing the registers you want to delete.
4. Press
Delete all Regs in Seq[n]
.
This deletes all registers in the selected sequence.