Agilent Technologies E6630A, Getting Started Manual

Page: 73 / 108

Test Set Operating System
3
Getting Started Guide 73
Configuring recovery prompt timing
You can configure the time at which the test set power-up process waits for the selection
of the recovery process by performing the following steps:
Step Notes
1 Right-click My Computer , and click
Properties .
This accesses the System Properties tabbed
page.
2 Click the Advanced tab.
3 In the Startup and Recovery section,
click Settings .
4 Under the System Startup section:
•
you can either clear the Time to
display a list of operating
systems check box,
or,
•
select the Time to display
recovery option
when needed check box and
change the seconds to
delay for it
You must be logged in as an administrator to change these settings. See “User
Accounts"
on page 44
for more information.