manualshive.com logo in svg

Agilent Technologies E5071C, Service Manual, Page: 336 / 385

Share
Download
Agilent Technologies E5071C Service Manual Download Page 336

 336

Appendix B

 

System Recovery

System Recovery

System Recovery

By executing system recovery, you can return the system of the E5071C (the Windows 
operating system and the firmware) to the factory state (at the time of purchase

*1

).

CAUTION

Strictly follow the steps described below. If you do any operation other than the following 
steps, the system may not be recovered.

Types of system recoveries

The following 2 types of system recoveries are available.

R

Factory recovery

Returns the contents of the C drive to the factory state.

R

User recovery
Returns the contents of the C and D drives to a user-specified state. To use this 
function, you must prepare for recovery in advance. For information on the 
preparation, see “Procedure to create the user backup image” on page 340 for 
information on the execution, see “Procedure to execute the user recovery function” on 
page 346.

Notes on executing the factory recovery function 

Executing the factory recovery function causes the following: 

R

In addition to the Windows operating system and the firmware, the following settings 
of the E5071C are returned to the factory state or a user specified state.

•

Network setting

•

GPIB setting

•

Printer setting

R

The driver for the supported printer installed after purchase is deleted. 

R

You need to execute initial registration again.

Files you created using the save function (files in the D drive) are not affected, but we 
recommend backing them up before executing system recovery for precautionary 
purposes. For more information on backup, refer to “Backing Up the Data” as described in 
E5071C Online Help.

*1.If the hard disk failed and has been replaced after purchase, the state when the replacement 

was performed is recovered. 

Summary of Contents for E5071C


































































































































































































































































































































































































Reviews:

No comments