manualshive.com logo in svg

Agilent Technologies E5071C, Service Manual, Page: 271 / 385

Share
Download
Agilent Technologies E5071C Service Manual Download Page 271

Chapter 6

 271

Replacement Procedure

Removable Hard Disk Drive Replacement

6. Re

placem

ent Pro

ce

d

ur

e

Figure 6-4 

Removable Hard Disk Drive Removal

e5071cse1097

1

3

2

6

7

5

4

4

Replacement Procedure

Step 1.

Replace the removable hard disk drive by inverse procedure of removal.

NOTE

Fasten the TORX T10 screws (item 6) using a torque screwdriver.

Step 2.

Insert the hard disk into the slot.

Step 3.

Turn the key to the left until it is locked, then remove the key.

NOTE

The “U” is displayed at the 8 segment LED on next to the removal hard disk when E5071C 
is turned on without key lock.

Step 4.

Restore backup files onto the new removable hard disk drive as described in “Restore 
Backup Files onto the New Hard Disk Drive” on page 272.

Step 5.

Calibrate the touch screen as described in “Calibration of the Touch Screen” on page 272.

Summary of Contents for E5071C


































































































































































































































































































































































































Reviews:

No comments