manualshive.com logo in svg

Agilent Technologies E5071C, Service Manual

The Agilent Technologies E5071C is a versatile network analyzer that offers exceptional performance and accuracy. This high-tech device enables precise measurements and analysis for various applications. Explore its full potential by accessing the comprehensive user manual, available for free download at manualshive.com.

Share
Download
background image

 288

Chapter 6

 

Replacement Procedure

USB (USBTMC) Interface Card Replacement

USB (USBTMC) Interface Card Replacement

Tools Required

•

TORX screwdriver, T10, T15, and T20

Removal Procedure

Refer to Figure 6-14 for this procedure.

Step 1.

Remove the outer cover as described in “Outer Cover Removal” on page 266.

Step 2.

Remove the three TORX T10 screw (item 1) fastening the angle and lift it. 

Step 3.

Disconnect the flat cable (item 2) from the PCI DSP card.

Step 4.

Remove the two TORX T10 screws (item 3) fastening the card to the rear panel. 

Step 5.

Disconnect the assembly (item 4) from the Digital Motherboard and lift it.

Step 6.

Remove the two TORX T10 screws (item 5) fastening the angle.

Summary of Contents for E5071C


































































































































































































































































































































































































Reviews:

No comments

Related manuals for E5071C

AccuMASTER 7434 User Manual preview
7434
Brand: AccuMASTER Pages: 2
Parr Instrument 6400 Operating Instructions Manual preview
6400
Brand: Parr Instrument Pages: 110
FCI ST100 series Operation Manual preview
ST100 series
Brand: FCI Pages: 44
FCI ST100 series Manual preview
ST100 series
Brand: FCI Pages: 36
FCI ST100 series Configuration Software Manual preview
ST100 series
Brand: FCI Pages: 26
Valor EXTREME DUTY TPMS Installation preview
EXTREME DUTY TPMS
Brand: Valor Pages: 2
Yamaha Disklavier E3 Quick Reference Manual preview
Disklavier E3
Brand: Yamaha Pages: 10
Yamaha Disklavier E3 Playing Manual preview
Disklavier E3
Brand: Yamaha Pages: 38
Yamaha Disklavier E3 Update Manual preview
Disklavier E3
Brand: Yamaha Pages: 45
PCB Piezotronics 393B32 Installation And Operating Manual preview
393B32
Brand: PCB Piezotronics Pages: 15
Datakom DV-0101 Quick Start Manual preview
DV-0101
Brand: Datakom Pages: 2
Guru Home Systems GU-HB-201-R1 Installation Manual preview
GU-HB-201-R1
Brand: Guru Home Systems Pages: 20
Tektronix KEITHLEY 4200-CVU-PWR Quick Start Manual preview
KEITHLEY 4200-CVU-PWR
Brand: Tektronix Pages: 6
Dive Gear Express DGX Gears XTRA Regulator Service Manual preview
DGX Gears XTRA Regulator
Brand: Dive Gear Express Pages: 26
Teledyne 3000ZA Operating Instructions Manual preview
3000ZA
Brand: Teledyne Pages: 81
Kawai CN34 Software Update preview
CN34
Brand: Kawai Pages: 2
National Instruments NI PXI-6541 Getting Started Manual preview
NI PXI-6541
Brand: National Instruments Pages: 40
Hioki PW3198 Manual preview
PW3198
Brand: Hioki Pages: 16

Brands by name

Popular brands

Load more brands