manualshive.com logo in svg

Agilent Technologies E5071C, Service Manual, Page: 276 / 385

Share
Download
Agilent Technologies E5071C Service Manual Download Page 276

 276

Chapter 6

 

Replacement Procedure

Removable Hard Disk Drive Replacement Option 017

Removable Hard Disk Drive Replacement Option 017

Tools Required

•

TORX screwdriver, T10

•

Torque screwdriver, TORX T10 (set to 0.50 N-m / 4.4 lb-in)

Removal procedure

Refer to Figure 6-7 for this procedure.

Step 1.

Insert the key (P/N 1390-1375) in the lock and turn clockwise (item 1).

Step 2.

Slacken a screw (item 2), then press the button (item 3) and remove the hard disk (item 4).

Step 3.

Remove the four TORX T10 screws (item 5), and remove the removable hard disk drive’s 
lid (item 6).

Step 4.

Remove the four TORX T10 screws (item 7) fastening the HDD bracket and remove it.

Step 5.

Remove the hard disk drive (item 8) from the connector board.

Summary of Contents for E5071C


































































































































































































































































































































































































Reviews:

No comments