manualshive.com logo in svg

Agilent Technologies E5071C, Service Manual, Page: 273 / 385

Share
Download
Agilent Technologies E5071C Service Manual Download Page 273

Chapter 6

 273

Replacement Procedure

Removable Hard Disk Drive Replacement

6. Re

placem

ent Pro

ce

d

ur

e

Figure 6-5 

Touch Panel Calibration Screen

e5071cse1078

Step 5.

Touch the x mark on the upper left with your finger. The mark x appears also on the lower 
left, upper right, and lower right. Touch the x marks in that order with your finger.

Touching the four locations described above with your finger automatically concludes the 
touch screen calibration.

NOTE

With no operation on the touch screen calibration screen for a preset time, it automatically 
closes and the previous measurement screen reappears.

Summary of Contents for E5071C


































































































































































































































































































































































































Reviews:

No comments