198
7
SCPI Command Reference
:CALCulate:USER[1-1]:ALLTrace:BDMarker:X:COUPle:STATe
:CALCulate:USER[1-1]:ALLTrace:BDMarker:X:COUPle:S
TATe
Syntax
:CALCulate:USER[1-1]:ALLTrace:BDMarker:X:COUPle:STATe {ON|OFF|1|0}
:CALCulate:USER[1-1]:ALLTrace:BDMarker:X:COUPle:STATe?
Description
Turns on/off bandmarker coupling function
Parameter
Equivalent key
USER Menu -> Marker Function -> Couple
USER Menu -> Marker Search -> Couple
:CALCulate:USER[1-1]:ALLTrace:LIMit:FAIL
Syntax
:CALCulate:USER[1-1]:ALLTrace:LIMit:FAIL
Description
Reads out the limit test result (Query Only)
Parameter
When the limit test is set to OFF, OFF or 0 is always read out.
Equivalent key
No equivalent key is available on the front panel.
:CALCulate:USER[1-1]:ALLTrace:MARKer:COUPle:STA
Te
Syntax
:CALCulate:USER[1-1]:ALLTrace:MARKer:COUPle:STATe {ON|OFF|1|0}
:CALCulate:USER[1-1]:ALLTrace:MARKer:COUPle:STATe?
Description
Turns on/off marker coupling function
Description
ON or 1
Set bandmarker coupling function mode to 'ON'
OFF or 0(Preset
value)
Set bandmarker coupling function mode to 'OFF'
Description
ON or 1
The limit test result is fail
OFF or 0(Preset
value)
The limit test result is pass
Summary of Contents for E5052A
