Agilent Technologies E4428C, User Manual

Page: 98 / 700

74 Chapter 3
Basic Operation
Using the Instrument State Registers
Deleting Registers and Sequences
These procedures describe how to delete registers and sequences saved to an instrument state register.
Deleting a Specific Register within a Sequence
1. Press
Preset
.
2. Press the
Recall
or
Save
hardkey.
Notice that the
Select Seq
softkey shows the last sequence that you used.
3. Press
Select Seq
and enter the sequence number containing the register you want to delete.
4. Press
Select Reg
and enter the register number you want to delete.
Notice that the
Delete Seq[n] Reg[nn]
should be loaded with the sequence and register you want to delete.
5. Press
Delete Seq[n] Reg[nn]
.
This deletes the chosen register.
Deleting All Registers within a Sequence
1. Press
Preset
.
2. Press the
Recall
or
Save
hardkey.
Notice that the
Select Seq
softkey shows the last sequence that you used.
3. Press
Select Seq
and enter the sequence number containing the registers you want to delete.
4. Press
Delete all Regs in Seq[n]
.
This deletes all registers in the selected sequence.
Deleting All Sequences
CAUTION
Be sure you want to delete the contents of all registers and all sequences in the instrument
state register.
1. Press
Preset
.
2. Press the
Recall
or
Save
hardkey.
Notice that the
Select Seq
softkey shows the last sequence that you used.
3. Press
Delete All Sequences
.
This deletes all of the sequences saved in the instrument state register.