manualshive.com logo in svg

Agilent Technologies E4428C, User Manual, Page: 340 / 700

Share
Download
Agilent Technologies E4428C User Manual Download Page 340

316

Chapter 10

CDMA Digital Modulation

Storing a Component Test Waveform to Memory

Storing a Component Test Waveform to Memory

In this section, you will learn how to store the component test waveform.

1. Press 

Mode Setup 

hardkey to return to the top-level menu.

2. Perform the following keypress sequence required for your format type.

For CDMA2000 Waveform Format

a. Press 

More (1 of 2) 

> 

CDMA2000 Define 

(

Multicarrier Define 

when 

Multicarrier Off On 

is On) > 

Store Custom 

CDMA State 

(

Store Custom Multicarrier 

when 

Multicarrier Off On 

is On) >

Store To File.

If there is already a file name occupying the active entry area, press the following keys:

Edit Keys

> 

Clear Text

b. Using the alphabetic menu and the numeric keypad, enter the file name using a maximum length of 

23 characters.

c. Press 

Enter.

For CDMA Waveform Format

a. Press 

CDMA Define 

(

Multicarrier Define 

when 

Multicarrier Off On 

is On) > 

Store Custom State 

(

Store Custom 

Multicarrier

 when 

Multicarrier Off On 

is On > 

Store To File.

If there is already a file name occupying the active entry area, press the following keys:

Edit Keys

> 

Clear Text

b. Using the alphabetic menu and the numeric keypad, enter the file name.

c. Press 

Enter.

Your user-defined CDMA state file is now saved to the signal generator memory.

NOTE

The RF output amplitude, frequency, and operating state settings are not stored as part of a 
user-defined CDMA state file.

Summary of Contents for E4428C





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments