manualshive.com logo in svg

Agilent Technologies E4428C, User Manual, Page: 109 / 700

Share
Download
Agilent Technologies E4428C User Manual Download Page 109

Chapter 3

85

Basic Operation

Enabling Options (E4438C Only)

4. Enable the software option:

a. Highlight the desired option.

b. Press 

Modify License Key

, and enter the 12-character license key (from the license key certificate).

c. Verify that you want to reconfigure the signal generator with the new option:

Proceed With Reconfiguration

> 

Confirm Change

The instrument enables the option and reboots.

Waveform Licenses

The waveform license allows waveforms, created on one ESG, to be downloaded to another ESG. Encrypted 
waveforms can be played by other ESGs that have the same options and licenses.

A waveform license is written to the signal generator when a software application, that generates waveform 
data, is installed on the PC. 

1. Access the Waveform Licenses menu: 

Utility

> 

Instrument Adjustments

> 

Instrument Options

 > 

Waveform Licenses

The following is an example of the signal generator display, which lists any time-limited licenses and 
perpetual licenses, the days left on time-limited licenses, and the software description:

Summary of Contents for E4428C





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments