manualshive.com logo in svg

Agilent Technologies E4428C, User Manual, Page: 574 / 700

Share
Download
Agilent Technologies E4428C User Manual Download Page 574

550

Chapter 16

W-CDMA Uplink Digital Modulation for Receiver Test

W-CDMA Uplink Concepts

W-CDMA Uplink Concepts

Data Channel Air Interface Block Diagram

Reference Measurement Channels (RMC)

The W-CDMA real-time signal generation modulation format provides reference measurement channels 
(RMC) at 12.2, 64, 144, and 384 kbps. This option also provides transport layer coding for AMR 12.2 
(adaptive multi-rate) and UDI 64 (unrestricted digital information) protocols. Along with user defined 
parameters for the DPCH, the ESG also supports the predefined 12.2 kbps RMC, 64 kbps RMC, 144 kbps 
RMC, AMR 12.2 kbps, and UDI 64 kbps with compressed mode.

The signal generator provides one-button setup capabilities for transport channel configuration. The 
dedicated physical channel DPDCH is predefined by pressing the 

Ref Measure Setup

 softkey (or sending the 

appropriate SCPI commands) and selecting the desired RMC. RMC 12.2 kbps is the factory default 
selection.

Summary of Contents for E4428C





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments