manualshive.com logo in svg

Agilent Technologies E4428C, User Manual, Page: 145 / 700

Share
Download
Agilent Technologies E4428C User Manual Download Page 145

Chapter 4

121

Basic Digital Operation

Understanding the I/Q Modulator Filter

Applying An I/Q Modulator Filter

Real-Time Signals

1. Configure the signal.

2. Set the I/Q modulator filter:

a. Press 

I/Q

 > 

More (1 of 2)

 > 

I/Q Mod Filter Manual Auto

.

This key is active only when using a real-time signal. When using an ARB signal, the 

I/Q Mod Filter 

Manual Auto

 softkey within the I/Q menu grays out.

b. In the filter menu, select 

Through

, 

2.1 MHz

, 

40 MHz

, or 

Auto

.

3. If not already done, turn on the modulation format.

4. Turn on the RF output.

ARB Signal

The I/Q modulator filter selections reside within the modulation format menu, instead of in the I/Q menu as 
for the real-time signals. For more information, see 

“I/Q Attenuator and Filters Settings” on page 122

.

1. Configure the signal.

2. Within the ARB modulation format menu, set the I/Q modulator filter:

a. Press 

ARB Setup

 > 

more (1 of 2)

 > 

I/Q Mod Filter Manual Auto

.

The 

more (1 of 2)

 softkey may not appear in all menus.

b. In the filter menu, select 

Through

, 

2.1 MHz

, 

40 MHz

, or 

Auto

.

3. If not already done, turn on the modulation format.

4. Turn on the RF output.

Summary of Contents for E4428C





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments