Agilent Technologies E4402/7B, User'S And Service Manual

Page: 22 / 27

22 User’s and Service Guide Supplement
Service and Safety Information
Service and Safety Information
Introduction
Review this product and related documentation to familiarize yourself
with safety markings and instructions before you operate the
instrument. This product has been designed and tested in accordance
with international standards.
NOTE
There are many other repair and calibration options available from the
Agilent Technologies support organization. These options cover a range
of service agreements with varying response times. Contact Agilent for
additional information on available service agreements for this product.
Refer to
“Contacting Agilent” on page 26 .
Cleaning Instructions
Clean the instrument cabinet using a damp cloth only.
Shipping Instructions
IMPORTANT
Agilent Technologies reserves the right to reformat or replace the
internal hard disk drive in your analyzer as part of its repair. This will
erase all user information stored on the hard disk. It is imperative,
therefore, that you make a backup copy of your critical test data located
on the analyzer’s hard disk before shipping it to Agilent for repair.
If you wish to send your network analyzer to Agilent Technologies for
service or repair:
•
Include a complete description of the service requested or of the
failure and a description of any failed test and any error message.
•
Ship the analyzer using the original or comparable antistatic
packaging materials.
•
Contact Agilent for instructions on where to ship your analyzer.
Refer to
“Contacting Agilent” on page 26 .
Before Applying Power
Verify that the product is configured to match the available main power
source as described in the input power configuration instructions in this
manual. If this product is to be powered by autotransformer, make sure
the common terminal is connected to the neutral (grounded) side of the
ac power supply.