Agilent Technologies E364XA Series, User Manual

Page: 55 / 220

Chapter 3 Front-Panel Operation and Features
Programming Overvoltage Protection
54
4 Clear the overvoltage condition and exit this menu.
The annunciator for OVP operation will not flash any more. The output will
return to meter mode.
1 Raise the OVP trip level higher than the level tripped.
2 Select the OVP CLEAR mode by turning the knob.
3 Clear the overvoltage condition and exit this menu.
The annunciator for OVP operation will not flash any more. The output will
return to the meter mode.
• Remote interface operation:
VOLT:PROT {<voltage>|MIN|MAX}
Set the OVP level
VOLT:PROT:STAT {OFF|ON)
Disable or enable the OVP circuit
VOLT:PROT:CLE
Clear the tripped OVP circuit
done done done done
By Adjusting OVP trip level
OVP
OVP OVP
OVP ON
ON ON
ON
OVP OVP OVP OVP CLEAR
done done done done
Over
Voltage
Over
Voltage
Over
Voltage
Over
Voltage