Agilent Technologies DSO9024H, User Manual, Page: 84 / 102

Using the Oscilloscope
84
To access the trigger setup
• Click the trigger setup button at the bottom of the waveform display.
or
• Select Trigger from the Setup menu.
The trigger setup dialog box lets you select any of the different modes of
triggering supported by the oscilloscope—Edge, Glitch, or Advanced, with
choices under Advanced of Pattern, State, Delay by Time, Delay by Events, or
Violation. You can set the parameters and conditions for each of those trigger
modes.
Figure 3-26
Accessing the Trigger Setup dialog box
Click this button...
...to access the Trigger Setup dialog box.
...or select
this menu
item...