Agilent Technologies DSO6014A/L, Programmer'S Reference Manual

Page: 134 / 634

134 Agilent 6000 Series Oscilloscopes Programmer's Reference
3
Commands by Subsystem
:STATus
(see page 564 )
Query Syntax
:STATus? <source>
<source> ::= {CHANnel<n> | FUNCtion | MATH | SBUS} for the DSO models
<source> ::= {CHANnel<n> | DIGital0,..,DIGital15 | POD{1 | 2}
| BUS{1 | 2} | FUNCtion | MATH | SBUS} for the MSO models
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :STATus? query reports whether the channel, function, trace memory,
or serial decode bus specified by <source> is displayed.
Return Format
<value><NL>
<value> ::= {1 | 0}
See Also
• "Introduction to Root (:) Commands" on page 102
• ":BLANk" on page 109
• ":CHANnel<n>:DISPlay" on page 172
• ":DIGital<n>:DISPlay" on page 188
• ":FUNCtion:DISPlay" on page 215
• ":POD<n>:DISPlay" on page 288
• ":VIEW" on page 137
N O T E
MATH is an alias for FUNCtion.