manualshive.com logo in svg

Agilent Technologies B1500A, User Manual

Share
Download
Agilent Technologies B1500A User Manual Download Page 175

Agilent B1500A User’s Guide, Edition 10

4- 43

Specifications

Desktop EasyEXPERT Software

Desktop EasyEXPERT Software

Desktop EasyEXPERT is the same software that is built-in to the Agilent B1505A 
Semiconductor Device Analyzer, except that it runs on a standalone PC and no 
support of the tracer test. Just like standard EasyEXPERT, Desktop EasyEXPERT 
supports all aspects of parametric test, from basic manual measurements to test 
automation across a wafer in conjunction with a semi-automatic wafer prober.

Features and benefits

•

Large application test library

Desktop EasyEXPERT comes with over 200 application tests conveniently 
organized by device type, application, and technology. Many of these 
application tests will run on the 4155/4156 without modification, and you can 
easily edit and customize the furnished application tests to fit your specific 
needs.

•

Offline capability

Desktop EasyEXPERT can be run in either online or offline mode. In the offline 
mode you can perform tasks such as analyzing data and creating new application 
tests. This frees up your existing analyzer from being needed for development 
work and enables you to use it for its primary purpose: making measurements.

•

GUI-based classic test mode

Desktop EasyEXPERT offers a classic test mode that maintains the look, feel, 
and terminology of the 4155/4156 user interface. In addition, it improves the 
4155/4156 user interface by taking full advantage of Microsoft

 Windows

 

GUI features.

•

Easy test sequencing

A GUI-based Quick Test mode enables you to perform test sequencing without 
programming. You can select, copy, rearrange and cut-and-paste any application 
tests with a few simple mouse clicks. Once you have selected and arranged your 
tests, simply click on the measurement button to begin running an automated test 
sequence.

•

Prober control

All popular semi-automatic wafer probers are supported by Desktop 
EasyEXPERT. You can define wafer, die, and module information for probing 
across an entire wafer. You can also combine wafer prober control with either 
Quick Test mode or an application test based test sequence to perform multiple 
testing on various devices across the wafer.

Summary of Contents for B1500A





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands