Agilent Technologies AuroraPresto, User Manual

Page: 77 / 266

Setting up
Aurora Presto
Issue 7 - 05/02 3-29
-2-
Choose
Auto
or
Manual
.
The default is
Auto
.
-3-
Press ENTER to accept the entry and return to the
PPP Setup
menu.
-4-
Choose
Attempts
and press ENTER .
-5-
Enter a number between 1 and 25.
The default is 1.
Note
Init Mode
and
Attempts
are only displayed if you have set
IP Mode
to
PPP
.
Setting up the Authentication Method
Before you begin a PPP session, you must set up the
Authentication Method.
-1-
Select
Authentication
from the
PPP Setup
menu.
A screen similar to the following is displayed.
-2-
Choose
PAP
(Password Authentication Protocol) or
CHAP
(Challenge Handshake Authentication
Protocol) if you want to use passwords or user names.
-3-
Press ENTER to accept the entry.
Setting up the User Name
-1-
Select
User
from the
PPP Setup
menu.
A screen similar to the following is displayed.
-2-
Enter a User Name (up to 40 characters). See entering
Entering Alphanumeric Information on page 2-16 for
information on entering alphanumeric information.
481801-7.book Page 29 Thursday, May 23, 2002 10:46 AM