Agilent Technologies AuroraPresto, User Manual

Page: 63 / 266

Setting up
Aurora Presto
Issue 7 - 05/02 3-15
Max TTL
Maximum Time to Live. Use this to set
up the maximum TTL value. Enter a
value between 1 and 75.
Time to Live, sometimes known as
hop count, is a value that is set by the
device that sends the Ping message.
The value is decremented by each IP
network router device that the
message passes through. When the
value = 0 the IP packet is deleted from
the network. This prevents un-routed
packets remaining in the network any
longer than necessary.
Timeout (ms)
Use this to set up the time to wait for
a response from a specified router
before terminating the test. Enter a
value between 500 and 5000ms.
Setting up the IP Options
The IP (Internet Protocol) Address is an address allocated to
a specific internet location. ADSL uses the IP address to
send data to, or receive data from a specific internet
location.
-1-
From the
Select Test Mode
screen press F4
Setup
to
display the
Main Setup
screen.
-2-
Select
IP
.
-3-
Press ENTER .
The
IP Setup
screen is displayed.
Mode
Choose
Bridged
,
Routed
or
PPP
. If
your
Aurora Presto
does not have the
PPP Option,
Mode
is always set to
Bridged
.
481801-7.book Page 15 Thursday, May 23, 2002 10:46 AM