Agilent Technologies AuroraPresto, User Manual

Page: 55 / 266

Setting up
Aurora Presto
Issue 7 - 05/02 3-7
Changing the Basic Configuration
You can change some of the basic operational settings of
your
Aurora Presto
- for example, the Serial Port settings.
Once you have defined these settings you will probably not
need to change them often.
-1-
From the
Select Test Mode
menu, press F4
Setup
to
display the
Main Setup
screen:
-2-
Select the option you want to set up and press ENTER
to display the
Setup
screen for the selected option.
Notes
• You can access the Setup menus from the
Status
screen. Press + 5 to display the Status screen from
any Setup menu. See Checking the Current Setup of
Aurora Presto
on page 3-41 .
• You can also access the relevant Setup menus from the
Test screens. Press F4
Setup
.
System
Use to set up
Aurora Presto
’s General
settings for example, LCD backlight
Language, Time and Date. See
General
Settings (System Setup) on page 3-31 .
Serial Comms
Use to set up the RS 232 port settings.
Data Port
Use to set up the data ports, Ethernet
or 10Base T. See
Setting up the Data
Port on page 4-73 .
Modem
Use to set up the Modem type and
settings.
481801-7.book Page 7 Thursday, May 23, 2002 10:46 AM