45
Setting up the computer and software
Verifying the Autofill Station configuration (96AM Wash Station)
AssayMAP Bravo Platform Installation Guide
Verifying the Autofill Station configuration (96AM Wash Station)
IMPORTANT
Use the following procedure to verify the Autofill Station
configuration settings in every AssayMAP profile.
Verifying the Autofill Station configuration in a profile
To verify the Autofill Station configuration in a profile
1
In
Bravo Diagnostics
, ensure the correct profile is selected in the
Profiles
tab.
2
In the
Configuration
tab, verify that the deck image shows a Pump Module at
deck location 1.
Note:
The AssayMAP 1 profile has no other accessories configured by
default.
3
To verify the settings, right- click deck location 1 in the image. In the
shortcut menu that appears, click
Configure location > Accessory
. The Bravo
Accessories Wizard opens.
4
In the
Location for accessory
list, verify the location and then click
Next
.
5
In the
Accessory already configured
page, click
Yes, reconfigure existing accessory
,
and then click
Next
.
