Agilent Technologies AIC 5000, Installation Manual

Page: 35 / 64

AIC Revision B Installation and Configuration 29
Step 2. Setup the IP address on the AIC Rev B
Like all network devices, the AIC needs an IP address to identify
itself on the network. The AIC is shipped already configured for
DHCP. If using DHCP, you may proceed to the next section.
Contact your network administrator if you aren‟t sure.
If using a static IP address instead of DHCP, you will need to do the
following:
1. From the Windows Start menu, select Start followed by
Control Panel . Click Network and Internet Connections and
then click Network Connections .
2. Right-click Local Area Connection .
3. Click Properties .
4. In the This connection uses the following items section, click
Internet Protocol (TCP/IP) , and then click Properties .
5. Fill in the values provided by your network administrator.
Step 3. Add the AIC Rev B to the domain
In order to communicate with computers, printers and users from
the domain, the AIC must be a member of the domain.
1. From the Start menu, select Control Panel and then select
System and then Computer Name .
2. Click Change .
3. In the Computer name box, type a unique name for the AIC.
4. Click Domain , and in the box, type a domain for the AIC.
5. When prompted, enter a network user with rights to add
machines to the domain.
6. Restart the AIC when prompted.
7. Login after restart as Administrator using admin as password
(all lowercase).