Agilent 990 Micro GC Micro Gasifier User Manual
9
1
Introduction
Shipping Instructions
Shipping Instructions
Follow these steps to prepare your Micro Gasifier for shipping:
1
Let the Micro Gasifier cool down for at least 30 minutes before packing.
2
Cap every inlet and outlet port.
3
Cap all inlet and outlet tubing.
4
Always include the power supply with the Micro Gasifier.
Cleaning Instructions
To keep the Micro Gasifier surface clean, refer to the remarks given below:
•
Switch the Micro GC off.
•
Remove the power cable from the mains.
•
Remove the Micro Gasifier power cable.
•
Use a soft (no hard or abrasive) brush to carefully brush away all dust and dirt.
•
If the outer case is dirty, (never clean the inside) clean it with a soft, clean cloth dampened with
mild detergent.
•
Never use alcohol or thinners to clean the Micro Gasifier. These chemicals can damage the
case.
•
Do not get water on the electronics components.
•
Do not use compressed air to clean.
Disposal Instructions
Disposal of the Micro Gasifier must be carried out in accordance with all (environmental)
regulations applicable in your country.
Summary of Contents for 990
Page 1: ...Agilent 990 Micro Gas Chromatograph Micro Gasifier User Manual ...
Page 4: ...4 Agilent 990 Micro GC Micro Gasifier User Manual ...
Page 10: ...1 Introduction Disposal Instructions 10 Agilent 990 Micro GC Micro Gasifier User Manual ...
Page 23: ...Agilent 990 Micro GC Micro Gasifier User Manual 23 ...
