Agilent Technologies 969-6500, User Manual, Page: 251 / 306

Instructions for Use
Installation
17
Turbo-V 903 Pumping System User Manual / 87-901-016-01 (A) 251/306
Installation
CAUTION!
Do not remove the adhesive and protective cap before connecting the turbopump
to the system.
Install this device only in indoor ambient and in any case don't use in an
environment exposed to atmospheric agents (rain, snow, ice), dust, aggressive
gases, or in explosive environments or those with a high fire risk.
During operation, the following environmental conditions must be respected:
maximum pressure: 2 bar above atmospheric pressure
temperature: from +10 °C to +35 °C
relative humidity: 0 – 90 % (non-condensing)
In the presence of magnetic fields the pump must be protected using a
ferromagnetic shield. See the appendix "Technical Information" for detailed
information.
The TV 903 Pumping System must be connected to a primary pump (see
"Technical Information").