3-1 Major Components
Hardware Overview
Agilent 93000 SOC Series User Training Part 1, October 2004
37
Every cardcage provides 8 slots, and there is one DC/DC board for 4
slots. But the DC/DC boards are different for digital and analog boards.
That is, you can split a cardcage reserving 4 slots for analog and 4 slots
for digital boards. This reflects the granularity of the DC power supply.
Testhead
The device under test (DUT) is mounted on a load board, which is
connected to the tester channels via the load board interface. The load
board interface provides docking capabilities to handlers and wafer
probers. The load board interface consists of coax cabling and contact
pins (pogo pins). The pogo pins make the contact to the load board.
All tester electronics are located inside the testhead: driver, receiver,
active loads, relays, parametric measurement units (PMUs), vector
memory, timing generator, and sequencing circuits, as well as device
power supply modules (DPS).
Load board interface
In addition to the digital/analog pogo pins, the testhead’s load board
interface provides:
• Power pins to supply power to the DUT
• Utility pins to control special functions implemented on the load
board, for example by switching relays or FETs
• Feature pins to control functions of the device power supplies
Underneath its covers, the testhead (512 pins as well as 1024 pins
testhead) is composed of cardcages each containing 8 slots for analog
or digital boards.
From the support rack
The testhead receives from the support rack:
• Cooling Water
The testhead is water cooled. Via the support rack, it receives its
supply of cooling water from a cooling unit.
• Compressed Air
The docking mechanism is controlled by compressed air, but can
also be operated manually, if required.
• DC Power (385 V)
• Control signals and data
Summary of Contents for 93000 SOC Series
