Agilent Technologies 8960 Series 10 Reference Manual Download Page 581

Page: 581 / 614

581

S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\ts_err_msg_mui.fm

Manual User Error Messages

Description

These messages are only intended to be displayed on the manual user interface only, they are not entered into
the Error/Event Queue.

Error Message

Description

MUI1 The function you requested is not yet available.

The test set does not have this capability.

MUI2 IQ Calibration completed successfully for modulator
<N>. Cycle power to continue.

<N> is the IQ modulator number that the user is
attempting to calibrate, <N> is 1 or 2.

MUI3 IQ Calibration failed for modulator <N>. Cycle power
to continue.

<N> is the IQ modulator number that the user is
attempting to calibrate, <N> is 1 or 2.

MUI4 The function you requested is not available in this
radio personality.

This function is used in another radio personality.

MUI5 IQ Calibration for modulator <N> in progress. Call
processing disabled

<N> is the IQ modulator number that the user is
attempting to calibrate, <N> is 1 or 2.

MUI6 Instrument warning: Audio generator instrument has
been closed.

The audio generator instrument was closed
automatically by the test set.

MUI7 Instrument warning: Audio Analyzer instrument has
been closed.

The audio analyzer instrument was closed
automatically by the test set.

MUI8 Measurement warning: Analog audio measurement
has been closed.

Analog audio measurements have been closed by
the test set.

XXXXXXXXXXXXXXXXXXXXX

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXX

Summary of Contents for 8960 Series 10






































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8960 Series 10

Reviews:

Brands by name

Popular brands

Agilent Technologies 8960 Series 10, Reference Manual

Search results

Summary of Contents for 8960 Series 10

Reviews:

Brands by name

Popular brands