manualshive.com logo in svg

Agilent Technologies 8960 Series 10, Reference Manual

Share
Download
Agilent Technologies 8960 Series 10 Reference Manual Download Page 498

498

 S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\hpib_COMMON.fm

IEEE 488.2 Common Commands

*SRE 

The *SRE, service request enable command, is defined in “IEEE Std 488.2-1992”, 10.34. The parameter range 
for this command is 0 through 255.

*SRE? 

The *SRE?, service request enable query, is defined in “IEEE Std 488.2-1992”, 10.35. Values returned by this 
query range from 0 through 255.

*STB? 

The *STB?, read status byte query, is defined in “IEEE Std 488.2-1992”, 10.36. Values returned by this query 
range from 0 through 255.

*WAI

The *WAI, wait-to-continue command, is defined in “IEEE Std 488.2-1992”, 10.39. The *WAI command 
prevents the test set from executing any further commands or queries until all pending operation flags are 
false. The *WAI common command is not recommended for use as an overlapped command.

Related Topics

*******************************************************

“Call Processing Event Synchronization” on page 30

“Preset Descriptions” on page 535

“Obtaining Identification Information *IDN?” on page 558

*******************************************************

Summary of Contents for 8960 Series 10







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands