manualshive.com logo in svg

Agilent Technologies 8960 Series 10, Reference Manual

Share
Download
Agilent Technologies 8960 Series 10 Reference Manual Download Page 190

190

 S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\prog_prog_guide_step6c.fm

Step 6c: Obtain a Set of Measurement Results

Step 6c: Obtain a Set of Measurement Results

Background

In order to minimize bus traffic in the manufacturing environment the test set’s high-level measurements 
have been designed to return multiple measured values in response to a single measurement request.

For example: if a transmit power measurement with averaging is initiated there will be five measurement 
results available as follows:

1. Measurement integrity value
2. Average value
3. Minimum value
4. Maximum value
5. Standard deviation value

The test set has been designed with the capability to return the measurement results in a variety of formats to 
suit the needs of the measurement environment. For example, the transmitter power measurement results 
can be returned as:

• Measurement integrity and average value

OR

• Average value and minimum value and maximum value and standard deviation value

OR

• Average value only

OR

• Minimum value only

OR

• Maximum value only

OR

• Standard deviation value only

OR

• Measurement integrity value only

The formats available for individual measurements can be found in the test set’s FETCh? subsystem’s GPIB 
command syntax reference information. 

Summary of Contents for 8960 Series 10







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands