manualshive.com logo in svg

Agilent Technologies 86100A, Programmer'S Manual, Page: 356 / 366

Share
Download
Agilent Technologies 86100A Programmer'S Manual Download Page 356

26-4

Waveform Memory Commands

YRANge

Query

:WMEMory<N>:YOFFset?

The query returns the current y-axis (vertical) offset for the selected waveform memory.

Returned Format

[:WMEMory<N>:YOFFset] <offset_value><NL>

Example

This example sets the y-axis (vertical) offset of waveform memory 2 to 0.2V.

10 OUTPUT 707;":WMEMORY2:YOFFSET 0.2"

YRANge

Command

:WMEMory<N>:YRANge <range_value>

This command sets the y-axis, vertical range for the selected memory. The vertical scale is 
the vertical range divided by 8. <N> is the memory number is an integer from 1 to 4. 
<range_value> is the vertical range value.

Query

:WMEMory<N>:YRANge?

The query returns the Y-axis, vertical range for the selected memory. 

Returned Format

[:WMEMory<N>:YRANge] <range_value><NL>

Example

This example sets the y-axis (vertical) range of waveform memory 3 to 0.2 volts.

10 OUTPUT 707;":WMEMORY3:YRANGE 0.2"

Summary of Contents for 86100A















































































































































































































































































































































































Reviews:

No comments