manualshive.com logo in svg

Agilent Technologies 86100A, Programmer'S Manual, Page: 350 / 366

Share
Download
Agilent Technologies 86100A Programmer'S Manual Download Page 350

25-12

Waveform Commands

XORigin?

XORigin?

Query

:WAVeform:XORigin?

This query returns the X-axis value of the first data point in the data record for the currently 
specified source . For time domain signals, it is the time of the first point. For VERSus type 
waveforms, it is the X-axis value at level zero. For voltage waveforms, it is the voltage at level 
zero. The value returned by this query is treated as a double precision 64-bit floating point 
number.

Returned Format

[:WAVeform:XORigin] <value><NL>

<value> is a real number representing the X-axis value of the first data point in the data 
record. 

Example

10 OUTPUT 707;":SYSTEM:HEADER OFF”
20 OUTPUT 707;":WAVEFORM:XORIGIN?"

See Also

You can obtain the Xorigin value through the WAVeform:PREamble query.

XRANge?

Query

:WAVeform:XRANge?

This query returns the X-axis duration of the displayed waveform. For time domain signals, it 
is the duration of the time across the display. For VERSus type waveforms, it is the duration 
of the waveform that is displayed on the X axis.

Returned Format

[:WAVeform:XRANge] <value><NL>

<value>

A real number representing the X-axis duration of the displayed waveform. 

Example

10 OUTPUT 707;":SYSTEM:HEADER OFF”
20 OUTPUT 707;":WAVEFORM:XRANGE?"

XREFerence?

Query

:WAVeform:XREFerence?

This query returns the data point or level associated with the Xorigin data value for the cur-
rently specified source. It is at this data point or level that the X origin is defined. In this ana-
lyzer, the value is always zero.

Returned Format

[:WAVeform:XREFerence] 0<NL>

Example

10 OUTPUT 707;":SYSTEM:HEADER OFF”
20 OUTPUT 707;":WAVEFORM:XREFERENCE?"

See Also

You can obtain the Xreference value through the WAVeform:PREamble query.

XUNits?

Query

:WAVeform:XUNits?

This query returns the X-axis units of the currently selected waveform source. The currently 
selected source may be a channel, function, or waveform memory.

Returned Format

[:WAVeform:XUNits] {UNKNown | VOLT | SECond | CONStant | AMP | DECibels}<NL>

Example

10 OUTPUT 707;":SYSTEM:HEADER OFF”

Summary of Contents for 86100A















































































































































































































































































































































































Reviews:

No comments