manualshive.com logo in svg

Agilent Technologies 86100A, Programmer'S Manual, Page: 298 / 366

Share
Download
Agilent Technologies 86100A Programmer'S Manual Download Page 298

19-6

S-Parameter Commands

MARKer:Y2Position?

MARKer:Y2Position?

Command

:SPARameter:MARKer:Y2Position?

Queries the amplitude value (Y2) of the X2 marker.

Query

:SPARameter:MARKer:Y2Position?

Returned Format

[:SPARameter:MARKer:Y2Position] <value><NL> 

MARKer:XDELta?

Command

:SPARameter:MARKer:XDELta?

Queries the frequency difference (

Δ

) between the X1 and X2 markers.

Query

:SPARameter:MARKer:XDELta?

Returned Format

[:SPARameter:MARKer:XDELta] <value><NL> 

MARKer:YDELta?

Command

:SPARameter:MARKer:YDELta?

Queries the amplitude difference (

Δ

) between the X1 and X2 markers (Y1 and Y2 positions).

Query

:SPARameter:MARKer:YDELta?

Returned Format

[:SPARameter:MARKer:YDELta] <value><NL>

VWINdow

Command

:SPARameter:VWINdow {ON | 1 | OFF | 0}

Turns on and off the display of the windowed time-domain region. This region highlights the 
the range of the TDR data that will be transformed to the frequency domain and displayed on 
the S-parameter graph. It is a visual aid for the user and does not alter the data range trans-
formed.

Example

10 OUTPUT 707;":SPAR:VWIN ON"

Query

:SPARameter:VWINdow?

Returned Format

[:SPARameter:VWINdow] {ON | 1 | OFF | 0}<NL> 

Summary of Contents for 86100A















































































































































































































































































































































































Reviews:

No comments