manualshive.com logo in svg

Agilent Technologies 86100A, Programmer'S Manual, Page: 116 / 366

Share
Download
Agilent Technologies 86100A Programmer'S Manual Download Page 116

4-8

Root Level Commands

JER?

are used at this time. The following table shows the enabled bits for each useful mask value. 
Bits that are not marked as enabled for a mask are blocked from affecting the operation sta-
tus register.

Query

:JEE?

The query returns the current decimal value in the Jitter Event Enable Register.

Restrictions

Jitter mode. Software revision A.04.00 and above (86100C instruments) with Option 100 or 
200.

Returned Format

[:JEE] <mask><NL>

JER? 

Query

:JER?

This query returns the current value of the Jitter Event Register as a decimal number and 
also clears the register. Bit 0 of the register is set when characterizing edges in Jitter Mode 
fails. Bit 1 of the register is set when pattern synchronization is lost in Jitter Mode. Bit 2 of 
the register is set when a parameter change in Jitter Mode has made autoscale necessary. Bit 
12 of the Operation Status Register (JIT) indicates that one of the enabled conditions in the 
Jitter Event Register has occurred.

Restrictions

Jitter mode. Software revision A.04.00 and above (86100C instruments) with Option 100 or 
200.

Returned Format

[:JER] <value><NL>

LER? 

Query

:LER?

Table 4-3. Enabled Bits for Mask Values

Mask 
Value

Bit 2

AREQD

Bit 1

JLOSS

Bit 0

EFAIL

0

1

•

2

•

3

•

•

4

•

5

•

•

6

•

•

7

•

•

•

Summary of Contents for 86100A















































































































































































































































































































































































Reviews:

No comments