Agilent Technologies 85056D, User'S And Service Manual

Page: 10 / 53

1-4 85056D
General Information
Incoming Inspection
Incoming Inspection
Verify that the shipment is complete by referring to Table 6-1 .
Check for damage. The foam-lined storage case provides protection during shipping. Verify
that this case and its contents are not damaged.
If the case or any device appears damaged, or if the shipment is incomplete, contact
Agilent Technologies. See
“Contacting Agilent” on page 5-5 . Agilent will arrange for repair
or replacement of incomplete or damaged shipments without waiting for a settlement from
the transportation company.
When you send the kit or device to Agilent, include a service tag (found near the end of this
manual) with the following information:
• your company name and address
• the name of a technical contact person within your company, and the person's complete
phone number
• the model number and serial number of the kit
• the part number and serial number of the device
• the type of service required
• a detailed description of the problem