Agilent Technologies 83437A, User Manual, Page: 89 / 106

5-35
Servicing
Replaceable Parts
5Servicing
Replaceable Parts
In this section, you’ll find figures that identify each mechanical and electrical
assembly in the instrument. An Agilent Technologies part number is provided
for each available part. The following identification figures are provided:
Table 5-6, “Major Assemblies,” on page 5-37
Table 5-7, “Cable Assemblies,” on page 5-39
Table 5-8, “Front-Panel Parts,” on page 5-41
Table 5-9, “Rear-Panel Parts,” on page 5-43
Table 5-10, “Top and Bottom View Parts,” on page 5-45
Table 5-11, “Side View Parts,” on page 5-47
Table 5-12, “Instrument Cover Parts,” on page 5-48
Part ordering information
To order an assembly or mechanical part, quote the Agilent Technologies part
number, and indicate the quantity required. To order a part that is not listed,
include the following information with the order:
• Agilent 83438A model number
• Instrument serial number
• Description of where the part is located, what it looks like, and its function (if
known)
• Quantity needed
Parts can be ordered by addressing the order to the nearest Agilent Technolo-
gies office. Refer to “Agilent Technologies Service Offices” on page 4-5. Cus-
tomers within the USA can also use either the direct mail-order system or the
direct phone-order system described below. The direct phone-order system
has a toll-free phone number available.