Agilent Technologies 83236B, Operating Manual, Page: 75 / 164

75
Chapter 3, Programming the PCS Interface using GPIB Control
PCS Interface Programming Guide
PCS Interface Programming Guide
For a complete description of the PCS Interface GPIB commands used in this
chapter see chapter 4, "GPIB Commands".
Conventions Used
Examples given in this chapter will include: the instrument to be programmed, the
command string, and the reference page in this manual for the given command
string.
For example:
To the PCS Interface> COMP:TEMP:REQ:RES ( page 104 )
or
To the Test Set> RFAN:INP ‘Ant’
NOTE: Reference information (reference page) for the command strings used to program the Test
Set are not included in this manual. Refer to your Test Set’s programming guide for
complete descriptions.