Agilent Technologies 83236B, Operating Manual, Page: 18 / 164

18
Chapter 1, General Information
Incoming Inspection
Incoming Inspection
WARNING: To avoid hazardous electrical shock, do not turn on the PCS Interface when there are
signs of shipping damage to any portion of the outer enclosure (for example, covers,
panel, or display).
Inspect the shipping container for damage. If the shipping container or cushioning
material is damaged, it should be kept until the contents of the shipment have
been checked for completeness and the PCS Interface has been checked
mechanically and electrically. The contents of the shipment should be as listed in
table 2 on page 19. If the contents are incomplete, if there is mechanical damage
or defect, or if the system does not pass the power-on self tests, notify the nearest
Agilent Technologies office. If the shipping container is damaged, or the
cushioning material shows signs of unusual stress, notify the carrier as well as the
Agilent Technologies office. Keep the shipping materials for the carrier's
inspection.