Agilent Technologies 83236B, Operating Manual, Page: 112 / 164

112
Chapter 4, GPIB Commands
RX Subsystem
RX[:RFG1]:TSET:LEVel?
ëû
< numeric >[DBM]
Specifies the level of the signal which you want to output from the RF IN/OUT or
RF OUT only port, and returns the level required at the FROM DUPLEX OUT
port, when the level of the wanted signal at the RF IN/OUT or RF OUT only is
specified in
< numeric >
. (Query only)
<numeric>: − 130 to − 10 dBm for RF:PATH 1
− 130 to − 20 dBm for RF:PATH 2
If the entered value is out of range, the value is rounded off to
the effective limit value.
• Response to the Query
{numeric (dBm)} <new line><^END>