Agilent Technologies 5975T LTM GC/MSD, Troubleshooting And Maintenance Manual

Page: 23 / 270

Introduction
1
Troubleshooting and Maintenance Guide 23
Safety and Regulatory Certifications
The 5975T LTM GC/MSD conforms to the following safety
standards:
• Canadian Standards Association (CSA): CAN/CSA-C222 No.
61010-1-04
• CSA/Nationally Recognized Test Laboratory (NRTL):
UL 61010–1
• International Electrotechnical Commission (IEC): 61010–1
• EuroNorm (EN): 61010–1
The 5975T LTM GC/MSD conforms to the following regulations
on Electromagnetic Compatibility (EMC) and Radio Frequency
Interference (RFI):
• CISPR 11/EN 55011: Group 1, Class A
• IEC/EN 61326
• AUS/NZ
This ISM device complies with Canadian ICES-001. Cet appareil
ISM est conforme a la norme NMB—001 du Canada.
The 5975T LTM GC/MSD is designed and manufactured under a
quality system registered to ISO 9001.
Information
The Agilent Technologies 5975T LTM GC/MSD meets the
following IEC (International Electro-technical Commission)
classifications: Equipment Class I, Laboratory Equipment,
Installation Category II, Pollution Degree 2.
This unit has been designed and tested in accordance with
recognized safety standards and is designed for use indoors. If
the instrument is used in a manner not specified by the
manufacturer, the protection provided by the instrument may
be impaired. Whenever the safety protection of the instrument
has been compromised, disconnect the unit from all power
sources and secure the unit against unintended operation.
Refer servicing to qualified service personnel. Substituting
parts or performing any unauthorized modification to the
instrument may result in a safety hazard.