Agilent Technologies 5975C TAD VL MSD, Troubleshooting And Maintenance Manual

Page: 25 / 276

Introduction
1
5975 Series MSD Troubleshooting and Maintenance Manual 25
Safety and Regulatory Certifications
The 5975 Series MSD conforms to the following safety standards:
•
Canadian Standards Association (CSA): CAN/CSA-C222 No. 61010-1-04
•
CSA/Nationally Recognized Test Laboratory (NRTL): UL 61010–1
•
International Electrotechnical Commission (IEC): 61010–1
•
EuroNorm (EN): 61010–1
The 5975 Series MSD conforms to the following regulations on
Electromagnetic Compatibility (EMC) and Radio Frequency Interference
(RFI):
•
CISPR 11/EN 55011: Group 1, Class A
•
IEC/EN 61326
•
AUS/NZ
This ISM device complies with Canadian ICES-001. Cet appareil ISM est
conforme a la norme NMB—001 du Canada.
The 5975 Series MSD is designed and manufactured under a quality system
registered to ISO 9001.
Information
The Agilent Technologies 5975 Series MSD meets the following IEC
(International Electro-technical Commission) classifications: Equipment
Class
I, Laboratory Equipment, Installation Category II, Pollution Degree 2.
This unit has been designed and tested in accordance with recognized safety
standards and is designed for use indoors. If the instrument is used in a
manner not specified by the manufacturer, the protection provided by the
instrument may be impaired. Whenever the safety protection of the MSD has
been compromised, disconnect the unit from all power sources and secure the
unit against unintended operation.
Refer servicing to qualified service personnel. Substituting parts or
performing any unauthorized modification to the instrument may result in a
safety hazard.