Agilent Technologies 4288A, Programming Manual

Page: 262 / 289

260 Appendix D
Initial Settings
Initial Settings, Settings that can be Saved/Recalled, Settings that can be
Backed Up
NOTE
The OPEN/SHORT/LOAD compensation data and the LOAD standard definition settings
for multi-compensation are not reset regardless of the resetting method used.
Multi
compensation
ON/OFF OFF No effect OFF
l m
Channel number 0 No effect 0
l m
LOAD standard definition method
(Single/Multi)
Single No effect Single
l m
Data transfer format ASCII ¬ ¬ ´ ´
Data buffer
Feeding target parameter None ¬ ¬ ´ ´
Control (feed/not feed) Not feed ¬ ¬ ´ ´
Size
Buffer 1 or Buffer 2 200 ¬ ¬ ´ ´
Buffer 3 1000 ¬ ¬ ´ ´
Comparator
ON/OFF OFF ¬ ¬ l m
Limit range
ON/OFF
BIN1 ON ¬ ¬ l m
BIN2 to BIN9 OFF ¬ ¬ l m
Secondary parameter ON ¬ ¬ l m
Limit range
setting
Upper limit value 0 ¬ ¬ l m
Lower limit value 0 ¬ ¬ l m
Limit range designation
method (mode selection)
ABS
¬ ¬ l m
Reference (nominal) value 0 ¬ ¬ l m
AUX BIN ON/OFF OFF ¬ ¬ l m
Low C reject
ON/OFF OFF ¬ ¬ l m
Limit value 0% ¬ ¬ l m
BIN count
ON/OFF OFF ¬ ¬ l m
Count value 0 ¬ ¬ ´ ´
Measurement signal level
monitor
Current OFF ¬ ¬ l m
Voltage OFF ¬ ¬ l m
Display
ON/OFF ON ¬ ¬ l m
Number of digits 6 ¬ ¬ l m
Fixed point
display
ON/OFF OFF ¬ ¬ l m
Value of the
highest digit
(Msd)
Primary
parameter
1 nF
¬ ¬ l m
Secondary
parameter
1
¬ ¬ l m
Deviation
measurement
mode
ON/OFF OFF ¬ ¬ l m
Mode DEV ¬ ¬ l m
Reference value 0 ¬ ¬ l m
Page number of instrument setup display area 1 ¬ ¬ l m
Key lock ON/OFF OFF No effect OFF ´ ´
Beeper
ON/OFF ON ¬ ¬ l m
Mode FAIL ¬ ¬ l m
Standard event status enable register value 0 No effect ¬ ´ ´
Service request enable register value 0 No effect ¬ ´ ´
Operation status enable register value 0 ¬ ¬ ´ ´
GPIB address 17 No effect ¬ ´ l
Table D-1 Initial settings, settings that can be saved/recalled, settings that can be backed up
Setting items
Initial settings
(factory settings)
Reset
Save/
Recall
Backup
Front panel key
(:SYST:PRES)
*RST