Agilent Technologies 4288A, Programming Manual

Page: 151 / 289

Chapter 10 149
Command Reference
:CALC1:MATH:STAT
1
0
. C
o
mm
and
Refe
re
nc
e
:CALC1:MATH:STAT
Syntax
:CALCulate1:MATH:STATe {ON|OFF|1|0}
:CALCulate1:MATH:STATe?
Description
Determines whether to use the function (deviation measurement mode) that displays the
primary parameter measurement result in deviation from the reference value (set using the
:DATA
command).
NOTE Changing any of the measurement parameters will automatically disable this function. To
avoid this, you have to write a program so that this command is executed after the
execution of the measurement parameter setup command (
:CALC1:FORM and
:CALC2:FORM ).
Parameters
Query response
{1|0}<newline><^END>
Related commands :CALC1:MATH:EXPR:NAME
on page 148
:CALC1:FORM
on page 147
:CALC2:FORM
on page 150
:CALC2:MATH:STAT
on page 152
Equivalent key
sequence
[
∆
Mode] ( [Blue] - [Meas Prmtr] ) - Pri
Description
ON or 1 Enables the deviation measurement mode.
OFF or 0 (initial value) Disables the deviation measurement mode (in other
words, displays the measurement result in an absolute
value).