manualshive.com logo in svg

Agilent Technologies 4156b, User Manual, Page: 232 / 414

Share
Download
Agilent Technologies 4156b User Manual Download Page 232

5-28

Agilent 4155B/4156B User’s Guide Vol.2, Edition 5

Analyzing Measurement Results
Automatic Analysis

To Draw Line by Specifying Two Points 

1. Press Display front-panel key.

2. Confirm that 

ON

 is set on the LINE 

secondary

 softkey on the GRAPH/LIST: 

GRAPHICS screen.

3. Select ANLYSIS SETUP primary softkey. The DISPLAY: ANALYSIS SETUP 

screen is displayed.

4. In field (1), select NORMAL secondary softkey.

5. In field (2), select secondary softkey to specify desired axis.

6. In field (3), select:

•

BY X-Y COORDINATE secondary softkey to specify a point by X-Y 
coordinate mode. (Go to step 6.)

•

BY DATA CONDITION secondary softkey to specify a point by data 
condition mode. (Go to step 7.)

7. If you selected BY X-Y COORDINATE secondary softkey:

a. In the X field, enter desired expression to specify X coordinate.

b. In the Y field, enter desired expression to specify Y coordinate.

c. Go to step 8.

8. If you selected BY DATA CONDITION secondary softkey:

a. In field (4), select secondary softkey to set desired data variable name.

b. In field (5), enter desired expression.

c. In field (6), select:

•

AFTER secondary softkey if you want to set a search start condition for 
finding specified point.

•

DISABLE secondary softkey to disable (clear) the 

AFTER

 settings.

d. If you selected AFTER, select secondary softkey to enter desired data 

variable in field (7).

e. If you selected AFTER, enter desired expression in field (8).

9. Specify the other point by step 5, then step 6 or 7.

Summary of Contents for 4156b































































































































































































































































































































































































































Reviews:

No comments