Agilent Technologies 41501A, User Manual

Page: 144 / 246

4-16 Agilent 4155C/4156C User’s Guide Vol.1, Edition 11
File Operations
Changing a File Name
Changing a File Name
1. Press System key.
2. Select FILER softkey to display the SYSTEM: FILER screen.
3. Specify the mass storage device.
4. Select RENAME softkey to display the RENAME setup fields.
5. Select FILE CATALOG softkey.
6. Move the pointer to the file name to be changed using the rotary knob.
7. Select SELECT SOURCE softkey. This sets the NAME and TYPE entries.
8. In the NEW NAME field, enter a new name. The name may be:
• a maximum of 6 characters for a diskette in HP LIF format. Do
not
use "_"
as the last character of the filename.
• a maximum of 8 characters for a diskette in DOS format.
• To store data in a new file on the network file system, enter a file name, 36
characters maximum. The file name and directory path combined can be 58
characters maximum.
To change the file name to an existing file name:
Select FILE CATALOG softkey, and move the pointer to the desired file name
using the rotary knob. Then press SELECT TARGET softkey.
9. Select EXECUTE softkey. The file name will be changed to the specified new
name.
10. Select EXIT softkey.
FUNCTION:RENAME
TYPE
NAME
NEW NAME