Agilent Technologies 1260 Infinity, User Manual

Page: 61 / 96

HPLC-Chip Cube Interface User’s Guide 61
Operation 5
Setting up Chip Cube Parameters
Setting up Chip Cube Parameters
Access this dialog box from the
Method & Run Control
screen by either
left-clicking the Chip Cube icon and selecting
Set up Chip Cube
or by selecting
the same command from the
Instrument
menu.
Figure 23 Chip Cube method parameters
Chip (Valve Positions / Tip)
With the two drop down menus the initial positions of both valves can be set.
For the protein ID chip and the MS calibration chip, only the inner valve is
used. Future chip designs may require the use of both valves.