2-9
Installation and Preparation for Use
Turning on the Agilent 11982A
Turning on the Agilent 11982A
With the power cable inserted into the line module, turn the lightwave con-
verter unit on by pressing the line switch. The green light-emitting diode
(LED) should light. If the LED should fail to light, see
.
Figure 2-4. The Agilent 11982A Front Panel
Table 2-4. Agilent 11982A Front-Panel Features
Index Number
Description
1
Line Switch.
2
Light-emitting diode (LED).
3
RF OUTPUT connector.
4
OPTICAL INPUT connector (with the interface connector removed).
5
Ferrule.
