Agilent Technologies 1141A, User'S Manual And Service Manual, Page: 6 / 88

6 1141A and 1142A User’s Guide
1 Operating the Probe
Introduction
Introduction
The 1141A probe with the 1142A Probe Control and Power Module
allows measurement of small differential signals in the presence of
much larger common- mode signals. It has the following major
features:
■
200 MHz bandwidth
■
Variable offset
■
dc reject
■
ac coupling
■
Remote operating capability
The variable offset capability can be used to measure small ac
signals in the presence of much larger dc levels. Remote operation
of key features allows the use of the probe system in automatic test
situations.
The probe can be used with an oscilloscope, spectrum analyzer, or
any instrument where differential probing is required and a
compatible 50
Ω
input is available.
Figure 1 1142A Probe Control and Power Module
Accessories Supplied
Figure 2 on page 7 lists the items supplied with the 1141A probe
system. Unnumbered items are supplied but not shown in figures.
See the Replaceable Parts List for parts not listed below.
Accessories Available
The following accessories can be ordered.
■
5959- 9335 Long Extension Lead (5.5 inch/14 cm), package of 5.
■
5090- 4833 Mini grabber for SMT, package of 20.