8
31025 R0
2.7. Hydraulic Winch Safety
When Equipped:
• Keep away from rotating cable drum and winch cable. Do not touch or grab cable while
winch is being operated or use hands to guide the cable. Failure to heed could result in
serious injury.
• Inspect cable and cable clamps before installing and using hydraulic winch. Replace cable if
frayed or damaged. Tighten cable clamps if necessary.
• Do not continue to supply power to hydraulic winch after the X-Tend hopper has reached
full up position.
• Do not disconnect hydraulic quick couplers when lines are pressurized.
• Make sure lift cable is seated in cable pulley.
• Always keep a minimum of 3 cable wraps on the cable drum.
2.8. Work Area Safety
• Have another trained person nearby who can shut down the X-Tend hopper in case of
accident.
• The work area should be kept clear of bystanders.
• Keep the work area clean and free of debris.
X-TEND HOPPER – X130
