Moving the Digitizer
To move the digitizer:
1.
Switch off the digitizer.
2.
Remove the power plug from the socket.
3.
Unplug the ethernet cable.
4.
Collect all cables together to prevent them from being crushed when
moving the digitizer.
5.
Remove all cassettes from the input and output buffer.
6.
Open the right side cover of the digitizer.
Open the eye of the latching and turn the latch through 90° clockwise.
7.
Take the tool from the tool box at the inside of the right door.
DX-G, DX-M | Introduction |
21
2321G EN 20181126 1428